These dust caps are designed to protect eyewash or face wash tap units from contamination.
These Bradley Plastic hinged dust cover retrofits onto Bradley 10" diameter plastic eye wash bowl to provide maximum protection from dust or other contaminants from getting in the eye wash bowl and clogging sprayheads and/or drain.
These Bradley wall-mount eye/face wash includes 10” diameter impact resistant yellow plastic or stainless steel corrosion resistant bowl. The unit contains a hinged stainless steel dust cover keeps dirt and other contaminants out of the eyewash bowl when not in use. The handle operates ½” IPS chrome-plated brass stay open ball valves. Meets ANSI Z358.1-2004. UPC &cUPC approved, SEI Certified.
Click here to download the technical specifications.
These Bradley wall-mount eye washes include 10” diameter impact-resistant yellow plastic bowl or corrosion-resistant stainless steel bowl. Meets ANSI Z358.1-2004 Standards. UPC & cUPC approved.SEI Certified.
These Bradley pedestal-mount eye and eye/face washes include 10" diameter impact-resistant yellow plastic bowl or corrosion-resistant stainless steel bowl. These units activate by a highly visible plastic push handle and ½" IPS chrome-plated brass stay-open ball valve. Meets ANSI Z358.1-2004, UPC & cUPC approved, SEI Certified
These Bradley swing-activated eye and eye/face washes mount to a counter or a wall next to a sink (swing-over units can be counter mounted only). The 90º swivel activates eyewash over sink to begin flow of water to cleanse the eyes. Spent water drains into the sink while in use. This eyewash stows neatly to side of sink when not in use to save space. Meets ANSI Z358.1-2004. Upc & cUPC approved. SEI Certified.
These Bradley faucet-mount eyewash mounts to standard or gooseneck type faucets. Simply remove existing faucet aerator and replace with faucet mount eyewash aerator adapter. The adapter on this unit is 55/64” x 27 thread (male) but includes two additional adapters to fit most faucets, 13/16” x 27 thread (male) and 15/16” x 27 thread (male). ANSI Z358.1-2004 Standards. SEI Certified.
This Bradley portable eyewash stations comes in a high visibility yellow color. The clear see-through tank makes visual inspections quick and easy. This gravity-fed eyewash mounts to a wall or can be placed on a counter top or other solid surfaces. This eyewash station is light weight - only 7 gallons and 60 lbs. when full and can be easily transported from one location to another even when fully assembled. This unit is filled with tap water and the water preservative, making it an extremely cost-effective solution. The water preservative comes in cases of 4 bottles. Meets ANSI Z358.1-2004 Standards. SEI Certified.
Hand-held hose sprays are available with single spray head or twin spray-head assemblies. Sprayheads are ABS plastic and include a flow control and pop-off dust covers. The valve is chrome-plated brass and stays open when the handle is squeezed. A yellow 8’ hose is rated at 450 PSI burst strength. Meets ANSI Z358.1-2004. UPC &cUPC approved, SEI Certified. An installer is required to supply backflow prevention as required by UPC, IPC and/or local plumbing code.
These Bradley stainless steel pressure tanks include tire filler valve with 0-160 PSI air gauge, pressure relief valve to prevent over pressurization and built in carry handles for easy transportation. A Transport Cart available for easy of mobility. Meets ANSI Z358.1-2004 Standards. SEI Certified.
Designed for wall (horizontal) or ceiling (vertical) mounting, these Bradley showers include either 10” diameter impact-resistant plastic or corrosion-resistant stainless steel showerheads. The flush mount shower includes a stainless steel integral shower head flange to mount even with ceiling to conceal pipe and fittings. The showers activate with pull rod and 1” IPS chrome-plated brass stay-open ball valve. The pipe is made of 1” galvanized steel protected with a yellow polyurethane coating to prevent corrosion. Water supply: 1” IPS (female). Meets ANSI Z358.1-2004. UPC & cUPC approved, SEI Certified.
These Bradley showers include a yellow impact resistant plastic 10” diameter showerheads that activates by a pull rod and 1” IPS chrome-plated stay-open ball valve. The eye and eye/face washes include twin spray heads with a flow control and popoff dust covers with either yellow impact resistant plastic or corrosion-resistant stainless steel 10” diameter bowls. The eye and eye/face washes activate by a highly visible push handle and ½” IPS chrome-plated stay-open ball valve.
This Bradley shower consists of a barrier-free design which makes these combination drench showers and eye/face wash units fully accessible to people with physical disabilities. Bradley meets accessible codes by assuring proper placement of shower and eye/face wash components. The eye/face wash includes chrome-plated circular spray rings with a flow control and pop-off dust covers with either yellow impact-resistant plastic or corrosion-resistant stainless steel 10" diameter bowls. Activated by large, highly visible push handle with 1/2" stay-open ball valve.
This Bradley PVC combination drench shower and eye/face wash includes yellow plastic shower head activated by a pull rod and 1” IPS chrome-plated stay-open ball valve. The eye/face wash includes plastic bowl with twin plastic sprayheads and is activated by a plastic push handle and ½” IPS chrome-plated brass stay-open ball valve. Fittings for PVC unit are all stainless steel. 2” schedule 80 PVC pipe and floor flange withstands highly corrosive environments including chlorine. Type 304 all stainless steel combination drench shower with eye/face includes all stainless steel showerhead operated by a pull rod with 1” IPS stainless steel stay-open ball valve. Stainless steel eyewash bowl with face spray ring is operated by a stainless push handle and stainless steel ½” IPS stay-open ball valve. 1¼” all stainless pipe and floor flange withstands highly corrosive environments.
Bradley Thermostatic Mixing Valves blend hot and cold water to a tepid flushing temperature (65º-95ºF). ANSI Standards require tepid water to assure the eyewash and drench shower do not subject the user to scalding or freezing water temperatures. Bradley valves feature an exclusive fixed cold-water bypass, which allows only cold water to flow through the valve in the event of loss or interruption of hot water supply or thermostat malfunction. These valves are pre-set at 85ºF, but can be adjusted to other temperature set points. Valves are available in a variety of options to accommodate various equipment applications.
The Bradley heat trace combination drench shower with eye/face wash is wrapped in heat-trace cable surrounded by insulation and enclosed with ¾” polyethylene yellow removable shell. This durable unit includes yellow plastic shower head activated by a pull rod and 1” IPS chromeplated brass stay-open ball valve. The eye/face wash includes ABS plastic twin sprayheads and is activated by a stainless steel push handle and ½” IPS chromeplated brass stay-open ball valve. The shower design allows this unit to be installed in up to -500 F freezing conditions. Meets ANSI Z358.1-2004, rated Class I Division II Groups B,C,D. SEI Certified.
